1993-Summer-TRAINING IN PROCESS SAFETY MEASUREMENT
The DOE Office of Safety and Quality Assurance (EH-30) is planning a
series of workshops on OSHA Process Safety Management requirements and
hazard analysis techniques. For information, call Sandeeva Kanth
(EH-31.2) at (301) 903-4516. The following schedule provides additional
training outside of DOE.
July 1993
12-18 Environmental, Health and Safety Law, Institute for Applied
Management and Law, Inc., Orlando, FL (714) 760-1700
19-23 Environmental, Health and Safety Law, Institute for Applied
Management and Law, Inc., Newport Beach, CA (714) 760-1700
August
4-6 Process Safety Management, Center for Chemical Process Safety, AIChE,
Seattle, WA
9-13 Safety Analysis and Risk Assessment for Chemical Process Industry
Practitioners, Course 1: Hazards Evaluation: Qualitative Methods, Center
for Chemical Process Safety, AIChE, Seattle, WA
10-12 OSHA Regulation 29 CFR 1910.119: The Process Safety Management
Approach for Compliance, Center for Chemical Process Safety, AIChE,
Seattle, WA
12-13 Fundamentals of Chemical Process Safety, Center for Chemical
Process Safety, AIChE, Seattle, WA
18-20 Use of Hazard and Operability Studies in Process Risk Management,
Center for Chemical Process Safety, AIChE, Seattle, WA
23-27 Safety Analysis and Risk Assessment for Chemical Process Industry
Practitioners, Course 2: Hazards Evaluation: Quantitative Methods,
Center for Chemical Process Safety, AIChE, Seattle, WA
25-26 Management of Change, Center for Chemical Process Safety, AIChE,
Seattle, WA
September
13-14 Fundamentals of Chemical Process Safety, Center for Chemical
Process Safety, AIChE, Orlando, FL
13-15 OSHA Regulation 29 CFR 1910.119: The Process Safety Management
Approach for Compliance, Center for Chemical Process Safety, AiChE,
Orlando, FL
15-17 Process Safety Management, Center for Chemical Process Safety,
AIChE, Orlando, FL
16-17 Failure Modes and Effects Analysis, Process Safety Institute,
Knoxville, TN [K. Evans, (615) 675-2580]
16-18 Use of Hazard and Operability Studies in Process Risk Management,
Center for Chemical Process Safety, AIChE, Orlando, FL
19-21 Process Safety Management, Center for Chemical Process Safety,
AIChE, San Francisco, CA
20-21 Management of Change, Center for Chemical Process Safety, AIChE,
San Francisco, CA
20-22 Process Safety Management Training, San Francisco, CA (509) 372-
4197 (DOE-sponsored; no charge)
20-24 Environmental, Health and Safety Law, Institute for Applied
Management and Law, Inc., Las Vegas, NV (714) 760-1700
October
4-8 Hazard Evaluation: Qualitative Methods, Process Safety Institute,
Knoxville, TN [K. Evans (615) 675-2580]
12-14 Advanced Process Hazard Analysis Leader Training, Process Safety
Institute, Knoxville, TN [K. Evans, (615) 675-2580]
25-29 Hazard & Operability and What-If/Checklist Leader Training,
Process Safety Institute, Knoxville, TN [K. Evans (615) 675-2580]
27-29 Process Safety Management, Center for Chemical Process Safety,
AIChE, St. Louis, MO
November
1-5 Safety Analysis and Risk Assessment for Chemical Process Industry
Practitioners, Course 1: Hazards Evaluation: Qualitative Methods, Center
for Chemical Process Safety, AIChE, St. Louis, MO
2-4 OSHA Regulation 29 CFR 1910.119: The Process Safety Management
Approach for Compliance Center for Chemical Process Safety, AIChE,
St. Louis, MO
4-5 Fundamentals Of Chemical Process Safety, Center for Chemical Process
Safety, AIChE, St. Louis, MO
10-12 Use of Hazard and Operability Studies in Process Risk Management,
Center for Chemical Process Safety, AIChE, St. Louis, MO
15-19 Safety Analysis and Risk Assessment for Chemical Process Industry
Practitioners, Course 2, Hazards Evaluation: Quantitative Methods, Center
for Chemical Process Safety, AIChE, St. Louis, MO
17-18 Management of Change, Center for Chemical Process Safety, AIChE,
St. Louis, MO
December
5-6 Fundamentals of Chemical Process Safety, Center for Chemical
Process Safety, AIChE, New York, NY
7-9 Process Safety Management, Center for Chemical Process Safety,
AIChE, New York, NY
7-9 Process Safety Management: Complying with OSHA's 29 CFR 1910.119,
Process Safety Institute, Knoxville, TN [K. Evans (615) 675-2580]
8-10 Use of Hazard and Operability Studies in Process Risk Management,
Center for Chemical Process Safety, AIChE, New York, NY
The Safety Connection
Safety Performance Indicator Division
EH-31.4, Room 5113 270 CC Germantown
U.S. Department of Energy
Washington, DC 20585